Products

ERIS SLM Firmware Update

ERIS SLM Firmware Update

An updated driver firmware for the ERIS Spatial Light Modulator offers a real 120 Hz operation mode. Compared to the method using 2 color channels sequentially to achieve frame rates above 60 Hz which still limits the input to 60 Hz, the refresh rates for both, input frames via the HDMI graphics interface and the output on the phase SLM display are boosted to 120 Hz. The driver enhancement further reduces the latency of the already fast and responsive ERIS SLM.

Read more...

Femtosecond erbium fiber laser

Femtosecond erbium fiber laser

Menlo System’s launches ELMO 780 XHP, the most recent development within their industry-grade femtosecond erbium fiber laser series. The new high-power version delivers more than 1 W average output power at 780 nm, with pulse durations at the 100 fs level in a very compact format. It also maintains state-of-the art stability, repeatability, and reliability of the laser parameters. The extremely robust, compact, and energy-efficient design allows for easy adaptation of the laser parameters to both scientific and industrial settings - ready for OEM integration.

Read more...

Laser Interferometer

Laser Interferometer

The laser interferometer Qualifire™ from Zygo Corporation is designed to support and enable metrology applications in industries such as semiconductor, lithography, space-borne imaging systems, cutting-edge consumer electronics, defense. This interferometer packs significant enhancements and features into a small lighter-weight package without sacrificing performance.

Read more...

Compact CW DPSS Laser Platform at 640 nm

Compact CW DPSS Laser Platform at 640 nm

The Coherent OBIS XT family delivers UV wavelengths of 360 nm, 349 nm, 320 nm, and now into the red spectrum at 640 nm. The Coherent OBIS 640 XT is an innovation in the expanding life science market, specifically addressing the growing demand for a 640 nm laser capable of exciting fluorescent dyes in super-resolution microscopy (SRM) and many other applications.

Read more...

InGaAs camera with sensitivity in the spectral range 400 nm - 1700 nm

InGaAs camera with sensitivity in the spectral range 400 nm - 1700 nm

LASER COMPONENTS has developed an ultrathin LTO detector (Lithium Tantalate - LiTaO3) design that minimizes noise while increasing responsivity by four times using sub-pixel binning. The LTO infrared detectors operate well within room temperature with no depoling concerns and require no temperature stabilization, typical for DLaTGS detectors. These pyroelectric detectors operate within single channel voltage mode without the need for cooling.

Read more...

Infrared Detectors for FTIR Spectroscopy

Infrared Detectors for FTIR Spectroscopy

The C16741-40U from Hamamatsu is an InGaAs camera with sensitivity in the visible to near infrared region from 400 nm to 1700 nm. It has a USB 3.1 Gen 1 interface port which supports 12 bit image acquisition and exposure time adjustment.

Read more...

CMOS Image Sensors

CMOS Image Sensors

Emerald™ Gen2 is a new CMOS image sensor family that is available in 8.9-Megapixels (4,096 x 2,160) or 12-Megapixels (4,096 x 3,072), in monochrome or color, and in two-speed grades, standard and high. The high-speed models provide superior performance for demanding applications that require sharp images at very high speeds, such as food sorting, inspection, and Intelligent Traffic Systems.

Read more...

Large Spatial Resolution Snapshot Multispectral Camera for the SWIR spectral range

Large Spatial Resolution Snapshot Multispectral Camera for the SWIR spectral range

The CICADA Multispectral camera is specially designed to allow high integration of SWIR multispectral systems. The CICADA stands out for its high raw spatial resolution (1.3MP). This lightweight (70g) and very small footprint (34x38x35mm) camera splits the image into 9 spectral bands on the SWIR range (1100-1700nm). Made by hybridization of a custom Bayer-like mosaic filter on a commercial InGaAs Sensor, it allows extracting the spectrum on each point of the image.

Read more...

Low Vπ LiNbO3 phase-modulator for high-power laser applications

Low Vπ LiNbO3 phase-modulator for high-power laser applications

Exail launches a new low Vπ LiNbO3 phase-modulator, designed for high-power laser applications. This new modulator, dedicated for Coherent Beam Combination (CBC) and Spectral Beam Combination (SBC), offers stability over time, temperature and vibration, while minimizing power consumption thanks to its ultra-low Vπ (up to 16 GHz). Specifically designed to handle up to 300 mW optical input at 1060 nm, this modulator is ideally suited for high-power lasers generation.

Read more...

Nouvelle collaboration entre Opton Laser International et Sirah Lasertechnik

Nouvelle collaboration entre Opton Laser International et Sirah Lasertechnik

Opton Laser International annonce sa collaboration avec Sirah Lasertechnik, fabricant de lasers accordables à colorants ou Ti :Sa. Lasertechnik, fabricant leader de lasers accordables à colorants ou Ti :Sa et parfait complément à la gamme de lasers accorables à OPO déjà proposée par Opton Laser.

Read more...