Nouveaux produits
InGaAs camera
- Détails
- Publié le mercredi 3 mai 2017 08:00
First Light Imaging complete its Infrared range of scientific cameras with C-RED 2, a very compact high-performance InGaAs camera. C-RED 2 outperforms the capacities of its 640 × 512 InGaAs 15 µm pixels high resolution sensor, offering a breakthrough frame rate up to 400 images per second full frame while being ultrasensitive: from 10 to 30 electrons read out noise at full speed. The sensor embeds an electronic shutter with an opening width lower than 1 µs. C-RED 2 is designed for astronomy, bioimaging or industrial applications, in very low light conditions and in any environment.
Micro spectrometers FT-IR
- Détails
- Publié le mardi 2 mai 2017 08:00
Si-Ware Systems (SWS) introduces the first integrated micro-spectrometer for broad industrial and consumer use. Delivering the same functionality as conventional “bench-top” spectrometers in labs, the integrated NeoSpectra Micro brings to end-users the ability to immediately quantify composition, detect impurities and ascertain quality, speeding analysis of samples from days to minutes without the need for offsite lab verification.
Power pump
- Détails
- Publié le lundi 1 mai 2017 08:00
LEA-Photonics is proposing a high power multi pump. Raman fiber amplifier for ultra long haul transmission systems is available in very compact modules or in a highly-developed 1U rack with SNMP supervision option. They are optimized to amplify DWDM signals over the C-Band with flat gain. The Raman amplifiers provide high output pump power using wavelength-combined 14xx nm pump laser diodes. They also incorporate automatic power reduction (APR) when the output fiber is not properly terminated or optically disconnected. Finally, the pump power ratio is tunable for gain optimization.
Piezo stage
- Détails
- Publié le vendredi 28 avril 2017 08:00
Micronix USA is now able to offer closed loop miniature piezo stages and a matched controller at the low price of typical low cost open loop stepper systems. Starting at 20mm x 18mm x 10mm (l x w x h), the new low cost PP-18 offers cross-roller bearings to assure high stiffness and is driven by our patented multi-phase piezo motor resulting in high speed (> 2 mm/s) and high blocking force (> 1.5 N). A linear encoder with 40nm resolution is standard on all PP-18 stage to assure repeatability.
Laser combiner
- Détails
- Publié le jeudi 27 avril 2017 08:00
Toptica’s NEW iChrome CLE, includes four laser sources with output power up to 20 mW max. All integrated wavelengths are controllable via a unified user interface (analog and digital inputs, as well as RS232 and Ethernet). Providing 405 nm, 488 nm, 561 nm et 640 nm, iChrome CLE is an excellent laser light source for microscopy, especially optimized for confocal microscopy. The combinaison of these colors enables excitation of the majority of popular fluorophores with only one fully integrated device. Toptica also provides a ready-to -use, user friendly control software.
Mid-IR supercontinuum laser
- Détails
- Publié le mercredi 26 avril 2017 08:00
Le Verre Fluoré and Leukos have polled their respective expertise in fluoride glass and in supercontinuum generation, to deliver an innovative Mid-IR supercontinuum laser. This solution, the SM-MIR, covering up to 4.1 µm, delivering more than 700 mW, is already available at Leukos.
Picosecond laser
- Détails
- Publié le mardi 25 avril 2017 08:00
The PiXea is a stand-alone picosecond laser dedicated for the most demanding industrial and scientific applications in the 375 nm to 2 μm spectral range. This very-low timing-jitter laser from Aurea Technology performs very sharp pulses width down to 20 ps with a continuously tuning of the repetition rate up to 100 MHz and a peak power up to 500 mW. Very well-designed, the outstanding-performances and the modern interfaces of the PiXea make it an essential tool for any accurate time analysis, characterizations and laser seeding.
Calibration light source
- Détails
- Publié le mardi 25 avril 2017 08:00
Gamma Scientific has expanded their family of SpectralLED tunable LED light sources for camera and image sensor calibration with a new system having a substantially larger output port, as well as increased output uniformity. Specifically, the new SpectralLED RS-7-2 mates up to four LED light source engines together with a 1 meter sphere that includes a 300 mm output port (other sphere and port sizes are available, as well). The result is a calibration light source for very large area detectors and large field of view cameras that delivers significantly higher brightness and approximately an order of magnitude higher radiometric stability (<0.1%) and wavelength accuracy (0.25 nm) than any competitive product.
Détecteur de contraste
- Détails
- Publié le lundi 20 mars 2017 08:00
Dédié aux processus d’emballage nécessitant la reconnaissance sûre des repères sur les films, les sachets et blisters d’emballage ou les étiquettes, le détecteur de contraste KRT 18B de Leuze Electronic est équipé d’une émission de lumière multicolore − 3 leds de couleurs rouge, vert et bleu. Il détermine automatiquement la couleur offrant le meilleur contraste et la reconnaissance sûre des repères. Un réajustement automatique garantit une détection fiable même sur des surfaces brillantes ou pâles.
Détecteur de LEDs
- Détails
- Publié le lundi 13 mars 2017 08:00
Destiné au test et à la détection de tous les types de LEDs, le détecteur MÉGA FINN distribué par Cotelec permet de réaliser des mesures en 3 millisecondes pour la majorité des LEDs. Capable de détecter 2000 teintes différentes, du bleu (400 nm) au rouge (700 nm), même dans les environnements de test difficiles (signaux parasités, lumière ambiante, LED de faible intensité...), le détecteur MÉGA FINN fournit rapidement des résultats précis. Son programme d’exploitation élimine les incertitudes liées notamment aux éclairages ambiants.
