Miroirs free-forms répliqués
- Détails
- Publié le mardi 14 mai 2024 08:30
MKS Instruments présente les nouveaux miroirs free-forms répliqués Newport (Replicated Freeform Mirrors). Les Newport Replicated Freeform Mirrors offrent une meilleure correction des aberrations, une meilleure qualité d'image, une meilleure transmission optique, et ils prennent moins de place dans le système optique. Les miroirs Newport™ Replicated Freeform Mirrors peuvent être utilisés dans des instruments analytiques, des systèmes d'imagerie, dans le suivi laser ou dans la transmission de données.
Single-Photon Detector
- Détails
- Publié le jeudi 25 avril 2024 08:30
The ID281 Pro is a compact rack-mounted Superconducting Nanowire Single-Photon Detector System to enable high-performance detection in quantum platforms. The ID281 Pro is designed to be integrated in quantum platforms for photonic quantum computing, quantum communication systems, and for any application requiring compactness to be at the forefront of R&D and enable operational use. It is designed specifically for commercial and research applications that require, simplicity and compactness. The new ID281 Pro packs IDQ’s industry-leading SNSPD technology into an 8U high rack-mount system optimized for fully autonomous 24/7 continuous operation. Its streamlined design contains all the necessary control electronics with an intuitive web interface.
High-power tunable diode laser
- Détails
- Publié le mercredi 27 mars 2024 11:05
The TA-SHG pro system is a high-power, tunable, frequency-doubled diode laser. It comprises a tunable diode laser, a high power semiconductor (TA) and an integrated frequency doubling stage (SHG pro). Alternatively, it is available with a fiber (FA) or Raman fiber (RFA) amplifier. The SHG stage is a folded ring cavity in bow-tie configuration with excellent thermal and mechanical stability.
All-fibered mid-IR picosecond laser
- Détails
- Publié le mardi 12 mars 2024 08:30
Brevity from LEUKOS is an all-fibered mid-IR picosecond laser emitting at 1960 nm. This laser is ideal for optical amplifier seeding or component characterization. Pre-amplified, it delivers 50mW at 4MHz repetition rate.
ERIS SLM Firmware Update
- Détails
- Publié le vendredi 1 mars 2024 08:30
An updated driver firmware for the ERIS Spatial Light Modulator offers a real 120 Hz operation mode. Compared to the method using 2 color channels sequentially to achieve frame rates above 60 Hz which still limits the input to 60 Hz, the refresh rates for both, input frames via the HDMI graphics interface and the output on the phase SLM display are boosted to 120 Hz. The driver enhancement further reduces the latency of the already fast and responsive ERIS SLM.
Femtosecond erbium fiber laser
- Détails
- Publié le jeudi 29 février 2024 08:30
Menlo System’s launches ELMO 780 XHP, the most recent development within their industry-grade femtosecond erbium fiber laser series. The new high-power version delivers more than 1 W average output power at 780 nm, with pulse durations at the 100 fs level in a very compact format. It also maintains state-of-the art stability, repeatability, and reliability of the laser parameters. The extremely robust, compact, and energy-efficient design allows for easy adaptation of the laser parameters to both scientific and industrial settings - ready for OEM integration.
Laser Interferometer
- Détails
- Publié le mercredi 28 février 2024 08:30
The laser interferometer Qualifire™ from Zygo Corporation is designed to support and enable metrology applications in industries such as semiconductor, lithography, space-borne imaging systems, cutting-edge consumer electronics, defense. This interferometer packs significant enhancements and features into a small lighter-weight package without sacrificing performance.
Compact CW DPSS Laser Platform at 640 nm
- Détails
- Publié le mardi 27 février 2024 08:30
The Coherent OBIS XT family delivers UV wavelengths of 360 nm, 349 nm, 320 nm, and now into the red spectrum at 640 nm. The Coherent OBIS 640 XT is an innovation in the expanding life science market, specifically addressing the growing demand for a 640 nm laser capable of exciting fluorescent dyes in super-resolution microscopy (SRM) and many other applications.
InGaAs camera with sensitivity in the spectral range 400 nm - 1700 nm
- Détails
- Publié le lundi 26 février 2024 08:30
LASER COMPONENTS has developed an ultrathin LTO detector (Lithium Tantalate - LiTaO3) design that minimizes noise while increasing responsivity by four times using sub-pixel binning. The LTO infrared detectors operate well within room temperature with no depoling concerns and require no temperature stabilization, typical for DLaTGS detectors. These pyroelectric detectors operate within single channel voltage mode without the need for cooling.
Infrared Detectors for FTIR Spectroscopy
- Détails
- Publié le vendredi 9 février 2024 08:30
The C16741-40U from Hamamatsu is an InGaAs camera with sensitivity in the visible to near infrared region from 400 nm to 1700 nm. It has a USB 3.1 Gen 1 interface port which supports 12 bit image acquisition and exposure time adjustment.
CMOS Image Sensors
- Détails
- Publié le jeudi 8 février 2024 08:30
Emerald™ Gen2 is a new CMOS image sensor family that is available in 8.9-Megapixels (4,096 x 2,160) or 12-Megapixels (4,096 x 3,072), in monochrome or color, and in two-speed grades, standard and high. The high-speed models provide superior performance for demanding applications that require sharp images at very high speeds, such as food sorting, inspection, and Intelligent Traffic Systems.
Large Spatial Resolution Snapshot Multispectral Camera for the SWIR spectral range
- Détails
- Publié le mercredi 7 février 2024 08:30
The CICADA Multispectral camera is specially designed to allow high integration of SWIR multispectral systems. The CICADA stands out for its high raw spatial resolution (1.3MP). This lightweight (70g) and very small footprint (34x38x35mm) camera splits the image into 9 spectral bands on the SWIR range (1100-1700nm). Made by hybridization of a custom Bayer-like mosaic filter on a commercial InGaAs Sensor, it allows extracting the spectrum on each point of the image.
Low Vπ LiNbO3 phase-modulator for high-power laser applications
- Détails
- Publié le mardi 6 février 2024 08:30
Exail launches a new low Vπ LiNbO3 phase-modulator, designed for high-power laser applications. This new modulator, dedicated for Coherent Beam Combination (CBC) and Spectral Beam Combination (SBC), offers stability over time, temperature and vibration, while minimizing power consumption thanks to its ultra-low Vπ (up to 16 GHz). Specifically designed to handle up to 300 mW optical input at 1060 nm, this modulator is ideally suited for high-power lasers generation.
Nouvelle collaboration entre Opton Laser International et Sirah Lasertechnik
- Détails
- Publié le lundi 20 novembre 2023 08:30
Opton Laser International annonce sa collaboration avec Sirah Lasertechnik, fabricant de lasers accordables à colorants ou Ti :Sa. Lasertechnik, fabricant leader de lasers accordables à colorants ou Ti :Sa et parfait complément à la gamme de lasers accorables à OPO déjà proposée par Opton Laser.
Sortie de la version 6.2 de COMSOL Multiphysics
- Détails
- Publié le samedi 11 novembre 2023 08:30
COMSOL annonce la sortie de la version 6.2 de COMSOL Multiphysics®, qui ajoute des fonctionnalités dédiées aux modèles de substitution pilotés par les données pour des applications de simulation autonomes performantes et la création de jumeaux numériques multiphysiques.
An innovative software for wavefront measurement
- Détails
- Publié le jeudi 26 octobre 2023 08:30
Phasics (www.phasics.com/en) announces the release of PhaseStudio, a new software designed to transform the landscape of wavefront measurement.
Uncooled Detector for Infrared and THz Radiation
- Détails
- Publié le mercredi 25 octobre 2023 08:30
PR No1 from LASER COMPONENTS is a pyroelectric receiver that aims at uniting high-quality detector technology with high-end electronics.
Compact single-shot CEP-meter
- Détails
- Publié le mardi 24 octobre 2023 08:30
Madeira (UltraFast Innovations) is a single-shot phasemeter that facilitates single-shot measurements of the carrier-envelope-phase (CEP) of few-cycle femtosecond laser pulses. The ability to characterize the CEP of few-cycle pulses is the backbone of attosecond metrology and key to achieving sub-cycle temporal resolution in a broad range of ultrafast laser applications.
Deformable Mirror for Microscopy & Ophthalmology
- Détails
- Publié le lundi 23 octobre 2023 08:30
mu-Imagine, a division of Imagine Optic dedicated to adaptive optics for microscopy, announces the release of mu-DM.
Air-cooled femtosecond laser
- Détails
- Publié le jeudi 28 septembre 2023 08:30
The aeroPULSE FS10 is a rugged and compact medical-grade femtosecond fiber laser based on NKT Photonics’s crystal fiber platform. The aeroPULSE family uses state-of-the-art mode-locking technology to deliver ultra-short femtosecond pulses with outstanding long-term stability, superior pulse-to-pulse stability, and low noise. It is ideal for applications such as optogenetics, ophthalmology, medical device manufacturing, and material processing.
